Questions & Answers for: Mitsubishi Galant oil changes

Question about 2004 Galant

2 Answers

oil light at idle oil light on at idle 2004 Mitsubishi Galant First,and most obvious is to check the oil level.If the oil has recently been changed,change the oil filter again just to eliminate any ...

Ad

What oil specs for the 2.4L 4 cylida hi im trying to find the correct oil specifications for my 2.4L mitsubishi a medium priced 20/50 depending ,if your in the polar regions then a 5/40 with a drop of

Ad

Question about 2004 Galant

1 Answer

oil light keeps coming on oil has been changed and oil pressure sensor has been changed, after driving for a while oil pressure light comes on when car is stopped goes out when driving. can you help ...

What engine oil is recommended for a GDI Mitsubishi Galant 1996 MODEL? My car when idaling, say at the traffic lights threatens to go off when the traffic lights go green. It worse when I switch on ...

...ones with the scheduled changes like I had mentioned. I have customers with Toyota's, Nissan's and Honda's which have gone past 300,000 miles on the original motors without oil consumption

2003 mitsubishi galant from last two oil change i notice it is consuming more oil and there is a smell from exust system it has 270000km on it You could find that at the milage its done you might find

...changing my lifters are loose or need changing in my 01 mitsubushi galant put some diesel in the oil about a half a pint ,3 sec squirt of fairy and then run engine for a couple of days normal use ...

Question about 2000 Galant

1 Answer

...right three squirts of fairy liquid and yes it musat be fairy and not the thin cheap one into the oil,then a pint of diesel poured in as well and run vehicle for a week ,drain oil and then refill ...

Question about 1996 Galant

1 Answer

Where is the oil drain on a 1996 mitsubishi galant I just changed my oil on mine....passenger side. towards the front. You'll see what looks like a pan. It is close to the wheel. The oil filter is on ...

your pcv valve and breather tube are working. lack of oil changes can cause ring not to seat. flush engine with gm top engine cleaner. may help release rings. run engine about 25 miles then change oil

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...