...open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the Input Tray and Output Tray Disconnect the power brick from the back of the printer. Lift the scanner unit. Look ...
...open , with your control remote input a several numbers, close, and ready!! is there anything like this ??? thanks a lot. Open the disc tray Press 1, 3, 7, 9 Press the button for the desired RC ...
Question about PhotoSmart C4480 All-in-One Printer InkJet
...input tray, and then try the alignment again. 2. In the HP Solution Center, click Settings. 3. In the Print Settings area, click Printer Toolbox. NOTE: You can also open the Printer Toolbox from the ...
Question about Digital Sender 9100C Multifunction Printer p/n C1313A Fax Machines
...input tray (Tray 4) is closed, the paper deck lifts the paper stack until it is just below the feed rollers. Photosensor flag PS34, the paper surface photosensor, determines when the paper stack is ...
Question about LaserJet 3015 All-In-One Printer
...and the reading is the same. Follow these steps: Remove all paper from the input tray.Open and close the door.Reinsert the paper into the input tray.Powercycle (turn off and back on) the
...open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the Input Tray and Output Tray Disconnect the power brick from the back of the printer. Lift the scanner unit. Look ...
Question about OfficeJet t65 All-In-One InkJet Printer
...text to be printed on the envelopes. Click the "Properties" or "Setup" button in the window that opens, then click on the tab labeled "Paper/Features." 4Click the "Type Is" pull-down menu and ...
...jam open input trays display is saying "13.2 paper jam open input trays then open and close top cover" Check for any paper jam in the tray and restart the printer and put it caliberate ...
...Open the media input tray and remove any media from the tray. Slide the media guides inward as far as they will go. Press and hold down the tabs inside the media input tray, and slide the media input ...
Question about FS-4100DN Mono Laser Printer
...open tray (bypass tray?). Will not pull envelope through the bypass tray either. You need to set the correct paper in the bypass tray settings on the machine. Once that is input you will have to tell ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions