...maytag atlantis washer and one while washing, opened the door to put a clothing item in and when he closed the door nothing happened. the washer would not work from then on... the lid switch on the ...
...maytag atlantis washer. I am not sure if the current problem is either thelid switch and the main control unit o simply the main control unit. The washer was working fine. My wife opened the lid and ...
Question about Atlantis MAV6451 Top Load Washer
...Maytag Atlantis washer that will not drain and spin unless you lift the lid and put it back down. If you do not perform the "lift lid" ritual, it finishes the cycle with water and suds having never ...
...and is easy to change. I made temporary repairs until I find a fuse from a used parts machine. Scott Anyone know how to open up the top or gain access into Maytag top Loader washers (Bravos
Question about Atlantis MAV7260B Top Load Washer
top-load washer has a big lint problem I have an older Maytag MAV7260BWW toploader that has major lint issues. I clean out the the small bowl on the center column in the washer, but that doesn't help.
Question about Atlantis MAV7260B Top Load Washer
Maytag Atlantis MAV6250AWW is going through the whole wash cycle and not rinsing or spinning? I open the lid and the tub is full of water and detergent? Is it possibly a bad timer? It's not overloaded
...top to put in some more clothes shortly after the wash cycle started. I thought at first it might be the lid switch, I can hear it clicking when it engages, but it doesn't start the washer - do you ...
maytag atlantis washer not draining my washer is not draining. how do i clear the drain? i have opened the machine, but can't tell how to get the hose disconnected. thanks! suzy you say it does not ...
Question about Atlantis MAV7551 Top Load Washer
...open the front panel of this top loading washer. It is the Atlantis MAV9750AWW. Most don't have a front panel. Just top panel and rear panel. Did you raise the top panel? There are clips there ...
maytag atlantis mav6300aww Drum is nou spinning, its on but when i open the lid its not spinnig. I checked the belt and its intact and moves ok. Is my problem the transmission pulley & bearing kit
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
