...the UX-108 fax machine. http://www.usersmanualguide.com/faxes/sharp/ux-108+178+188/ or just google "UX-108 user" need to change the outgoing telephone number that is being printed on my outgoing ...
Question about UX 108 Roll paper Thermal Fax
...FAX MACHINE OUTGOING FAXES RE: SHARP UX 108 THERMAL FAX MACHINE I CANNOT SEND FAXES. IT IS ANYTHING OBSTRUCTING? ALL CONNECTIONS ARE OK. I CAN RECEIVE BUT I CANNOT SEND OUT' PLEASE ADVISE I need the ...
Outgoing faxes I have a 4100 Intellifax, and when we send outgoing faxes, the recipient gets a very dark, black blurry page. We receive faxes with no problem. Help! Not good! It sounds like you have a
...fax any outgoing Hi. The fax machine at work does not seem to print any confirmation and won't take any outgoing faxes. On the screen it says, "RESERVED and it's on SLEEP. Can you guide me on how to ...
Outgoing faxes are black. Incoming faxes are fine. All outgoing faxes are coming up black. just copy a paper if copy is black ur scanner is dirty or dead .first clean scanner with tissue other wise ...
Question about IntelliFAX 4100 Laser Fax
...outgoing fax's i do not understand i recieve fax's no problem only my outgoing. the phone line works fine. what can the problem be. My fax shows poor line condition. I have checked all of the ...
crooked and poor quality outgoing faxes The outgoing faxes are of poor quality and the text is crooked even though the paper appears to be going through the machine straight. Is there a service center
Question about 1020 Plain Paper Thermal transfer Fax
...in backwards. Outgoing faxes should be sent face-down. If you are sending properly, either your scanner is failing (test it by copying a document) or the recipient is having fax issues on their
Brother Intellifax 770: LED shows "Faxes in memory" not sure if they are incoming or outgoing. Can not find in manual how to get them out to print (incoming) or send (outgoing). help~! ...
Question about Panafax UF-585 Plain Paper Laser Fax
...outgoing fax? To set Outgoing Fax Number/ ID follow the follwing steps: - - Press FUNCTION, Press 7 (Set mode will appear on display) - Press 1 (User Parameters Settings) - Press Set repeatedly until ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions