water shield from the door; this will be reused upon installation. Disconnect the inside door lock rod from the handle retainer clip. Detach the door lock rod from the retainer clip. Remove the rubber
...outlet hose to the water pump. 6. Position the surge tank outlet hose clamp at the water pump. 7. Install the outlet hose to the water pump. 8. Position the outlet hose clamp at the water pump. 9. ...
...water outlet elbow and the intake manifold. Use a new gasket when installing the elbow to the manifold. Install the new thermostat making sure the spring side is inserted into the engine. Tighten the ...
...water pump Air inlet and outlet duct Coolant Hope this help to solve it (remember comment and rated this). Your best bet would probably be to buy a Haynes Manual. They are often available at parts ...
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions