pair of grip pliers for the job. Release the grip, push further into pipe, fit pipe maximum into connection, grip clip again & clamp it over the rubber & connection. A proper grip plier is the key....
grip something like a nut with TREMENDOUS force. You can get a pair of these pliers at any Home Depot or auto parts type store. The Toolman at these store cab show you how to use them If you decide to
...you have enough there to grip on to. PULL OUT EACH PIECE WITH A PAIR OF INSULATED NEEDLENOSE PLIERS. HOPE THIS HELPS. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA, GOOD ...
...escape and it won't come out. no nice way to do this, but a pair of vise grips to get a good grip on the key and a SMALL hammer ,pull out on vice grips and tap vice grips with hammer at the same ...
...to hold the plastic base and a pair of vice grips to grip the shaft of the screw and turn it until it unwinds, remove the plastic base and replace with new ones hope it works for you as it did for ...
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
...hard to get a good grip and I can't get the thing to budge. Is there a solution? Maybe try using a pair of channel-lock pliars or a pair of vise grip pliars on the thing. Please vote on this
2002 2500 sprinter need to change fuel filter 2 pair Vise grips 4 pennys place 2 pennys over the hose and close the vise grips firm to close the fuel line at both sides in and out remove clamps change
...on my hoover ultima wt741 washing machine any tips please? This is a common problem, my fix is 2 pairs of mole grips and a long screwdriver. Clip a grip nice and tight on the furthest sides of the ...
...loop tightly over its pin with a pair of vice grips. If you can't get a grip on it that way., leave the loop off and use a pair of needle nosed plyers inside the loop to make it more of a closed
Question about 2002 Sprinter
...not lock to be able to remove it. Any ideas what I can do. Using a pair of vice grips (with protection so as not to damage chuck) grip chuck and strike vice grips with a rubber mallet, undoing
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions