Questions & Answers for: paper jam bypass tray ricoh

...driver is set for the correct envelope size. If envelopes tend to jam in the printer, try setting the bypass paper type for thick paper. download the rpcs driver on the website dont use the pcl6 ...

...jam when trying to print from the bypass tray before it even attempts a pickup. This is happening to me also. The rollers sound like they're turning, but the paper doesn't advance. I then go into th ...

...device as it will jam due to the use of optical paper sensors unless your ohp has a paper backing. you can set up the bypass tray for thick paper type to increase fuser temp to get better fusing ...

...jam indication but there is no paper jammed. If it shows it all the time there is paper or at least something, if it jams on the first copy paper size or paper direction issue. Does the display show ...

...paper jam caused by timing error, being that the bypass utilizes the main body for the bulk of the feed cycle and your main drawer works, I would double check what size you've got programmed in for ...

...jam on regular plain white paper dbl sided ? if yes it depends on where it jams and what the service jam code is, if no then how thick of color paper is it ( is it within the copier specs ? ). If the ...

paper jam was cleared from the bypass tray.. still says paper is jammed.. there is nothing in it u have to check the paper path sensor located in the door unit .and also check the fuser for paper jam

...paper jam. I cleared the jam and it seemed fine and then a couple of sheets later said there was still a jam, which there was not. Sometimes it will print if I stand at the printer lightly pressing ...

...paper jamming taking place right behind bypass tray (section C on printer diagram). The accordion folds indicate all the types of paper are striking something beyond the feed point. There is probably ...

cardstock, it never works Jams from where? Need more info. Cardstock must be printed from the Bypass Tray ONLY. Make sure you select the proper paper type from the Printer Properties tab in the driver