Questions & Answers for: pav2300aww agitator

Ad

Question about Performa PAV3200

1 Answer

...PAV2300AWW Wahing Machine The agitator in this washing machine is rather loose and there doesn't seem to be any screws or fasteners to tighten. Do I need to replace it? Tks, Johnny Banging side to ...

Ad

Question about PAV2300 Top Load Washer

1 Answer

WASHER WON'T WASH MY MAYTAG PAV2300AWW WASHING MACHINE WON'T AGITATE DURING WASH AND RINSE CYCLES. WASHER SPINS FINE, I HAVE CHECKED OUT THE BELT AND ROLLERS AND THEY LOOK FINE. Check the pully Cam if

Ad

...Performa PAV2300AWW Washer makes grinding noise when agitating. Agitator very difficult to move in any direction, even when belt is removed. Spin cycle spins freely and works fine. check water ...

maytag PAV2300AWW Washer makes grinding sound when agitating makes grinding noise when agitating, but not during spin cycle. Louder on regular than on gentle setting. Water fills and drains out fine ...

Question about Performa PAV3200

1 Answer

hello i have a MAYTAG washer top loader/ model-PAV2300AWW. The washer will not agitate but will drain and spin with no problem. About give or take six months ago the transmisson gears inside went on ...

...pav2300aww will not spin even though it agitates and drain but when it comes to the spin cycle it just kind of hums I looked at the bottom of the washer while it was in spin cycle and the belt was ...

pav2300aww will not spin at all yet it agitates and drains well I was told to clean the agitator so I took it off yet the washer still don't spin the switch look wore out to me so I by-passe Check the

Question if my matag washer model# pav2300aww will not spin out and is suspected to have a bad thrust bearing would the washer still agitate with a bad thrust bearing. Thank u for your time. you may ...

Hey I have a Maytag PAV2300AWW and the first problem was the unit overflowed. So I tried blowing in the hose in the top panel and nothing.. Then, it started working again ( the water would turn off ...

Maytag pav2300aww washer will not agitate or spin - belt is ok Door switch defective is likely cause.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...