Questions & Answers for: where is pcb indesit

Ad

Question about W 123 Front Load Washer

1 Answer

Indesit widl 102 washer dryer, the extra rinse button is permanently on! Any way to reset it? Thanks! Check that the button isn't stuck it if not remove top lid and check the PCB and see if the switch

Ad

Question about 24 in. IDL700 Built-In Dishwasher

1 Answer

INDESIT IDL705 WATER NOT GETTING HOT chances are the element has gone or the heater relay on the pcb has blown. does the d/w pause during the cycle?

Ad

...on the controller pcb lost its program (happens often on Indesit machines). The only solution I know is to change the controller pcb, - not a cheap solution. I have the same problem with WIDL

Question about W 123 Front Load Washer

1 Answer

indesit w1E127 on disply says F 08 indesit w1E127 on disply says F 08 fo8 heater relay located on main pcb. replace it. try here http://www.emwelec.co.uk/

Question about 24 in. IDL500 Built-In Dishwasher

1 Answer

Indesit IDL500 not heating (element is fine) Dishwasher stopped heating water, and i have checked the elements resistance which was fine, am now wondering whether im going to need new PCB/ where I can

Question about 24 in. IDL500 Built-In Dishwasher

1 Answer

eeprom on the controller pcb lost its program (happens often on Indesit machines).The only solution I know is to change the controller pcb, - not a cheap solution.I have the same problem with WIDL 106

Question about 24 in. IDL500 Built-In Dishwasher

1 Answer

...indesit laundry appliances. Word of caution tho inde pcb's are generic to a range and the software must be programmed via a lap top to your specific appliance so you can't just order a pcb and pop it ...

Indesit IWC6105UK washing machine broke down with what I thought was just a burnt out pump (blocked and jammed,) but when I replaced the pump it didn't work. No power is coming through the pump leads,

...Indesit WISL 103 - Does not Start. everything looks like ok, but I click to start button, nothing happens. what can I do for that, please? Thanks suggest calling a local repair service.could be as ...

Indesit tumble drier, the drum won't turn, belt is ok and it is heating up Check the motor for voltage. If voltage present then with motor or brushes faulty. If no voltage then pcb fault

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18139 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...