Questions & Answers for: Dodge pcm plug

instructions reference "pin numbers", however there's no reference on the PCM plug, nor the computer. How do I determine what the numbering scheme is? thx much! The numbers are on the PCM not the plug

...due to the plug under dash the inspection plug has no power showing leading into the brain so i cant get a read out to get an inspection done NO POWER TO PCM COULD BE THE FUSE OR THE PCM ...

...dodge ram v10 is misfiring in cylinder 4 and 7 ,i changed the plugs,plug wires and coil packs and it is still doing the same thing.Could it be the PCM? very well could be i would check the pcm

...pcm plug in Hooked up to pcm intermitted readings showing short.Do I need new PCM? Your best bet would be to go to an alternator rebuilding shop and have them test the alternator. They should be able ...

I have a 2002 dodge ram 1500 quad cab and I am getting no power to the ****** from the pcm. I have changed pcm, governor pressure sensor and solenoid, I have changed the OD and TCC solenoid assembly, ...

plug socket, has a large cast tab. feed pin is 2pm clocked loc. and other side top is PCM reg side. 7pm clocked. wire DG/O (darkgreen-orange) goes to ASD relay(FEED?) wire DG goes to PCM (reg) that is

...harness plugs...Remove plugs from PCM...,Remove old PCM..lightly lube connecter pins with cotton swab..,plug in wiring harness connectors..re-connect battery

...pcm and the coil plug, all is well there. I ordered a replacement pcm, had the compant flash it with my mileage and vin. plugged it all in, truck will not do anything, no crank nothing. So I am ...

...pcm that the connectors plug into. This is a fast drying electrical contact cleaner, dries in about 5-10 minutes. Now plug the connectors back onto the pcm, hook up the battery, and see if the ...

...you plugged in a noid light where the fuel injector would normally plug in? Does it flash? If yes replace injector, if no you have to check wires from injector to pcm. If wiring checks ok replace ...