Questions & Answers for: philips tv cold reset

Philips 34PW9817 34" Shouts off and red light continuously blinks You will be watching TV and it just turns itself off and the red light continuously blinks. The only way I have been able to get the ...

Ad

Question about CCC130AT 13 in. TV/VCR Combo

1 Answer

tv, but can watch movies.the screen comes up snowy, i have even checked the cable with another television, and that worked fine. it seems that there is a problem with your tuner. check inside if there

Ad

Question about 20PT6441 20" TV

1 Answer

...Philips TV wont stay on TV set needs to be warmed up before it will on continuously. Then it has now the problem that it will on for about 8seconds then will off automatically. you need to turn it on ...

Question about 28PW6305 28" TV

1 Answer

philips 28pw6305 tv turns off tv turns its self into standby. And if you use the remote it does not do anything not even flash the led on the front. If you leave it on sometimes a picture will come on

Question about 28PW6305 28" TV

2 Answers

...philips 55PL9524 lcos color was fading in and out and is now faded out (still color, but very dull especially around the edges of the screen). What could cause this? HI, It is a convergence problem. ...

Question about 28PW6305 28" TV

3 Answers

......

Question about 42PF7320A 42 in. Plasma HDTV

1 Answer

...Philips 42 in.Plasma in Jan 2006.Has been a trouble free tv up to this week when it is now failing to switch on ist time.It takes several attempts of switching on and then off and holding for 10/15 ...

Question about 42PF7320A 42 in. Plasma HDTV

8 Answers

...Philips Support for nearest service center for proper repair. If your TV still does not turn on after unplugging , then you will have to retry for a longer period of time. Try longer periods of time ...

Question about Magnavox 27MS343S 27" TV

3 Answers

Philips Magnavox 27MS3404/17 27" TV When I turn the TV set on cold it comes on for 2-3 seconds then immediately shuts off with the power light still glowing and a rapid clicking noise starts. The TV ...

in front of tv about 2-3 inches from screen. Your problem is not in menu , its inside the tv located at matrix board since this tv was 5 yrs old, cold solder or defective Transistor might be the cause

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...