Questions & Answers for: photoconductor reset

Question about E238 Laser Printer

3 Answers

...reset only when a brand-new photoconductor kit is installed. Resetting the page count without replacing the photoconductor kit could cause the photoconductor to operate beyond its intended life and ...

Ad

...reset the photoconductor page count: Turn off the printer. While the printer is off, press and hold the Select () and Return () buttons on the operator panel. While keeping both buttons held down, ...

Ad

Question about E342n Laser Printer

3 Answers

...reset a new photoconductor in lexmark e450dn. According to Lexmark E450DN service manual; 1. Turn off the printer. 2. Press and hold Checkmark and Right Arrow buttons. 3. Turn on the printer. 4. ...

reset. To confirm that the photoconductor page count has been reset, it is recommended that you print a menu settings page and check the photoconductor level. Do the following: With the printer at the

Question about Lemark E352DN Laser Printer

1 Answer

...whenever you replace the photoconductor unit. Here's an article in the Lexmark website on how to reset the photoconductor page count. Just click on this link: http://bit.ly/9WAvUK. Hope this

...Reset the Photoconductor Page Count on a Lexmark E340 or E342. Click on this link http://bit.ly/b1Qil7. Thank you for choosing Lexmark. NOTE: Resetting photoconductor page count should be done only ...

Question about Lemark E352DN Laser Printer

1 Answer

...reset the PC counter, Instructions on how to replace photoconductor unit available at http://bit.ly/aykTXL Instructions on how to reset photoconductor counter available at http://bit.ly/9WAvUK ...

Question about E332n Laser Printer

1 Answer

...reset only when a brand-new photoconductor kit is installed. Resetting the page count without replacing the photoconductor kit could cause the photoconductor to operate beyond its intended life and ...

Question about Infoprint 1622 Laser Printer

1 Answer

reset the counter. IBM infoprint 1622 - Photoconductor When replacing a photoconductor on an IBM infoprint 1622 you must follow these following steps to reset the counter. 1. Open up the printer front

Question about E342n Laser Printer

1 Answer

reset photoconductor Replace the photoconductor: 1. Turn the printer off, and replace the photoconductor unit. 2. Reset the page count. • Press and hold Select and Return while turning the printer on.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...