Questions & Answers for: Chrysler no picture or sound

a error message and won't play the dvd's. I can't eject them or do anything with them. the dvd on a 2004 chrysler pacifica doesnt start you can hear the sound but no picture. what could be the problem

Ad

...should the picture appear on the screen? the model is 2008 Have you tried replacing batteries in the remote control and switch on from there ? It worked with mine, I had the sound but no

Ad

Question about 1996 Sebring

1 Answer

...sound there should be a picture under your hood. It will be labeled " belt routing". If the diagram is missing then you can pick up a chilton manual at your local parts house for about $20. It also ...

...sound in park. My first thought would be the neutral safety switch on the transmission but you shouldn't even get a click in park if that is bad. One possibility is the contacts in your starter have ...

Question about 2002 Town & Country

1 Answer

...sound can be heard but no picture. Fuse? Blown Screen? Thanks yea the cold cathodes or inverter for them has most likely gone bad. if the fuse was bad it wouldn't have sound. best thing to do is ...

Question about 2002 Town & Country

1 Answer

I drive a 1984 dodge daytona. There is low hum and a mild vibration felt on the steerinhg wheel. This only happen when the car reaches the speed of 30 to 35 miles per hour only. Sounds like a classic ...

...picture of it and also i was wonder what it would sound like if it was the starter that was bad I use and I'd recommend you register for free at www.autozone.com Once registered you'll have ...

...sound. Get picture and sound from Auxillary jacks so it is not the screen. Ran cleaner in player. didn't help chrysler town and country; rear seat dvd has no picture. Hear sound. Get picture and ...

...is there is more room than in most vehicles. A Chilton/Haynes repair manual will give you, with pictures, the exact location. It will give you the diagram of what fuse does what as well. And ...

...picture, pin 8 is hot all the time. If you use proper jumper wire between pin 8 and pin 10, the horn should sound. If it does, have to check coil/control side of relay, voltage and ground. The horn ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...