Questions & Answers for: Cisco ping address

Question about (1841) Router (cisco1841)

1 Answer

...address 192.168.20.1 and the WAN interface interface f 0/1 with 217.20.242.26 ,I used sdm to configure it and when I connected it to our network with the ISP modem connected to the WAN interface and ...

Ad

Question about (1841) Router (cisco1841)

1 Answer

...address 10.10.10.4 and subnet 255.255.255.248.  I cant ping the Router and it will not respond to Ping. possible firewall on the router check settings make sure its not blocking ping requests ...

Ad

Question about Catalyst 3560-24PS Switch

1 Answer

i require a circuit diagram for the liteon pa1201 power supply My router some port is not ping ip addresses

...ping specific web address - Cisco router A friend of mone can not surf or ping specific web address that he needs access too from his network. From router (in console, enable mode), I also can not ...

...after installing ASA 5505 After installing Cisco ASA 5505, I cannot see my network printers. Tried pinging the printers IP address. All packets are lost. 1. Please check your printer's IP address

Question about 877 ADSL Security Router

1 Answer

...router to see if the router lost connectivity. 2. Pinging an outside address will tell you if you have lost connectivity with the ISP or not. Ping test = Ping www.yahoo.com this is within the ...

Question about (1841) Router (cisco1841)

1 Answer

...address 10.13.10.9 255.255.255.252 ip nat outside ip virtual-reassembly speed auto full-duplex ! ip forward-protocol nd ! ! no ip http server ip route 0.0.0.0 0.0.0.0 10.13.10.10 ! Now my question is ...

Question about Linksys E1200 Wireless-N Router

1 Answer

...routers ip address.your routers ip adress will be listed as DEFAULT GATEWAY.then write PING 12.12.12.12 and hit enter.REPLACE THE 12.12.12.12 WITH THE NUMBERS YOU GOT FROM IPCONFIG / DEFAULT

Question about Small Business 500 Series Stackable Managed Switch SG500-28P - switch

1 Answer

...address learned on the switch reduced more than 80 percent, from 2000 MAC to around 300 MAC. The devices are being connected on the switch still operate normally. However, when we move the network ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Cisco Computer and Internet Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...