PIP function The PIP circuit board on Mitsubishi projection Tv's go bad and may render the picture to go out completely. I know a PIP circuit card is available that will bypass the PIP function and ...
PIP fuzzes out, then snaps back in When the tv is in single picture mode it looks fine, but when I switch it to picture in picture, the PIP video feed comes in for about 1 sec, fades to static, then ...
changing channels on pip feature i wish to use the pip feature on my tv, but cannot figure out how to switch channels on the pip without changing the main channel on the screen. i bought the unit used
...problems some of which is just what you described. For a small fee, I can give you some common solutions that will take care of these and other issues. The only problem is you must know how to take ...
32 xbr vega trinitron PIP wont turn off i pressed the PIP television icon, it came on, i pressed it again to turn it off and all that happened was the PIP got smaller, i pressed it again and i got ...
...you go hmmm. Any thoughts would be appreciated! the problem you have is the video goes thru the pip board first and the pip board has a problem this is a known problem. the pip board has some ...
pip pictture doesn t turn off sony tv kp-53xbr45 accidently turned pip on and now can not turn off using a sony rm-t169 remote I had the same problem many times, and I don't have the original remote. ...
Loss of PIP since Anology switch off To you pip usually you can PIP with two HiDef inputs as its too much stress on the processor to deal with. for example you can pip a scart and an HDMI/Component ...
Question about WS-55315 55" Rear Projection HDTV-Ready Television
...picture works fine but PIP is bad or Green? either the PIP tuner or the PIP board is bad---these were known to have the PIP have problems but it was more rare than their sets made before it.SD ...
Question about WS-55315 55" Rear Projection HDTV-Ready Television
...PIP board usually develops problems with surface mounted caps and there is a "modification" where traces are cut and two 4.7 mfd caps inserted which will bypass the PIP board from the set--a model ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions