Questions & Answers for: where to plug subwoofer in

subwoofer. tried both left and right output. tried to plug 2 pairs of speakers simultaneously to the left and right. tried to connect the speakers and the subwoofer parallelly) Problem is I can barely

...subwoofer plug on the back of the receiver and powered it up and toggled between the DSP and Surround modes and I just cannot seem to get the subwoofer to produce any sound or bass tones. I have the ...

...PLUG UP THE SUBWOOFER TO AMPLIFIER On the back of the amp, there should be a jack with the name "SUBWOOFER PRE OUT". It is a standard RCA jack, but it only puts out a line output, meaning only ...

Subwoofer plug broken? I have a yamaha rx-v661 receiver and a Sony SA-W3000 subwoofer, and both were working great until about a week ago when our neighborhood had a power hit. I was able to reset the

...when turned on makes a low hum followed by a pop.....regardless of whether the audio cord is plugged back in or not. Have tried different input location, but sub responds the same no matter

...plug into the subwoofer pre-out and still no sound. Games coming on and no bass somebody please help Sorry for the stupid question but is your subwoofer a powered sub? The subwoofer out is just a ...

...subwoofer cables 2 subwoofers Instructions Plug the Y-adapter into the home theater receiver's "Subwoofer OUT" jack. Connect an RCA subwoofer cable to each jack on the Y adapter and route the cables ...

...plug into the subwoofer, subwoofer plugs into outlet. satellites plug into the speaker input (green) on the PC the subwoofer plugs into the wall on a 110 volt outlet. then use mastervolume control.. ...

...subwoofer out is only a single plug then you can use a Y adapter. But, most powered subwoofers will work with only one side plugged in. Try that and if it's not working right.. then get the Y

...plug the subwoofer's power cord into an outlet shared by the other components. Use an extension cord if necessary. If the hum persists, and your system includes a cable TV, disconnect the cable line. ...