Questions & Answers for: polygon error

Question about Ricoh Office Equipment & Supplies

Error SC320 appear on screen..

...error change... The polygon mirror motor does not reach operating speed within 10 seconds after the motor ON signal is sent, or does not turn on within one of the 200 ms check intervals during ...

Question about Ricoh Office Equipment & Supplies

1 Answer

Error 320

...error.The polygon mirror motor does not reach the operating speed within 10 sec or the polygon motor remains out of the operating speed.Possible cause:defective polygon mirror motor,loose connection ...

Question about KM-1510 Copier

1 Answer

It has stopped working and is displaying a

...Chek toner for Flashing AP Error C400 polygon motor synchronization problem 1. poor contact in polygon motor connector terminals 2. defective polygon motor 3. defective power supply board or main ...

Question about AR-5316 Advanced Digital Imager Copier

1 Answer

My sharp AR-5316 is displaying

...Error code L6: Polygon motor lock trouble Details : The polygon motor does not rotate. Possible Cause : Polygon motor unit failure Polygon motor connection harness trouble or disconnection MCU PWB ...

Question about Aficio 250 Copier

1 Answer

I have code SC320 of

...Polygon motor error -Definition- [B] The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 40 ms ...

Question about Aficio 2022 All-In-One Laser Printer

1 Answer

Aparece el error SC 320

...error The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 200 ms continuously during operation. ...

Question about Aficio 2022 All-In-One Laser Printer

1 Answer

Sc335 ricoh 2045 copier

sc335 ricoh 2045 copier Code: 335 Description:Polygonal Mirror Motor Error 1: ON Timeout The XSCRDY signal is not issued (LOW: Active) within 25 s after the polygonal mirror motor switches on. Causes:

Question about e-Studio 161 Copier Copier

1 Answer

I have a toshiba photocopiar

error L 6 10 code pl resolved/ solution problem The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is detected for

Question about KYOCERA/MITA - KM-C3130 Printer

1 Answer

Hi! I've got a KM 1650 it boots up then it say ready to copy after few second now printing then C400 error occur please help. kyocera KM 1650 error now printing then c4000 error comes up

C4000 error occur please help. kyocera KM 1650 error now printing then c4000 error comes up c4000 polygon motor sychronize error, try to cleaning polygon, if not effective, need to replace new polygon

Question about AR-M160 Laser Printer

1 Answer

ERROR CODE L6

...ERROR CODE - L6 Polygon motor lock detection Detail : The polygon motor does not rotate. The motor lock signal is detected for 6sec after rotation of the polygon motor. The motor lock signal is ...