no power when plugged in one day it just quit running. No power at all- tried different plug ins and cords- still no power This sounds like a failed power supply. Most Brother units don't just blow a ...
...goes you will see a glass strip (this scans your original). It should light up when the machine is powered on. If not this item has most likely failed. I have seen it before where rust around the ...
Printer doesn't work at all. Status light is red. I had a power outage. Then my printer started acting weird. At first the lights were yellow. Now, when I turn the printer on, all the lights go yellow
Question about Desktop Publisher 540 (DP540CJMAIL)
...won't print at times. Power fails. cord DP530CJ won't print at times. Power fails. cord and adadpter fine. ave your unit be checked by a qualified tech. There might be a problem with the power ...
Question about FAX-8360P Plain Paper Laser
I received a brother 8360p from our other office but when i plug in the power cord to the outlet it does not turn on. I do not see an actual on/off switch either. Am i missing a step? They don't have ...
Question about IntelliFAX 770 Plain Paper Thermal Fax
machine will not turn on. power source is good. machine will not turn on. power source is good. is there a replaceable fuse or is machine dead? No fuse, the non-replaceable Power Supply has failed.
...cartridge and return it back. Turn it off for 1 minute and turn it on. If still problem, Remove the power cord to 30 second and return it back with power supply turn off. and restart the ...
no power The power supply board has failed, causes, main fuse, bridge diodes, and electrolytic capacitor, are the more common parts to fail. The copier must be dismantled to find the extent of damage ...
Question about HL 2140 Laser Printer
...do you clear it? Your printer needs servicing due to a fault on its electronics. This is due to a power surge or spikes cause by an abnormality in your power distribution system or your power ...
...on and i have tried to hold down the button on the front but nothing happens When you flip the power switch on the side, you should see either lights on the front or hear the fuser and cooling ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions