Questions & Answers for: Hannspree power fails

hanns. g HC174DP power led flashing Help please i have been given 12 of these TYPE ....Hanns G HC174DP monitors.I have tried to install on my computer. I'm running XP Pro, 512megs memory, i have tried

...The problem can be in the backlight inverter circuits, bad lamps, or failed capacitors in the power supply section, you need to open it up and inspect the caps first, post back what you see so ...

screen wont turn on at all hit the power botton screen stays black You may have failure in the power supply, or inverter back light circuits, you need to open it up and inspect the inside for such ...

screen wont turn on at all hit the power botton Screen wont turn on at all hit the power botton screen stays black Most common failures in the LCD monitors are bad capacitors (bulging top/seal or ...

...Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, failed inverter circuits (blown fuse, shorted transistors, shorted/open

I now have several Hanns G 174A monitors that have gone dark, power light on, and a quiet, but distinct "clicking" sound from the monitor about every second or so. Any ideas? (no video source plugged ...

screen goes blank anywhere from 1-10 seconds after powering up. Same whether powering up monitor or tower. Have re-connected to terminal numerous times. Power indicator on bottom right remains blue. ...

My monitor goes off. When I turn the power off then back on, the screen comes on momentarily, then goes off again! The power light stays on during this. It sounds like the backlight power supply is ...

...to work correctly for about 1 second the the screen goes black. The monitor is still getting power because the power button stays green the whole time.. If you are going to DIY and already try ...

Powers off after green light comes on Have to unplug the power cord and plug back in to get then red light to come back on -ALL lcd tvs, except for latest units with LED backlighting ,use from two to ...