...power to the machine is not getting from the electric outlet.just call the local electrician and check out the power supply voltage from the electric outlet.and power required to the machine which ...
Question about 1040 Plain Paper Inkjet Fax
...machine, disconnect the power cable from backside of the machine and from wall outlet. * Press and hold the Power button for 60 seconds. * Connect the cable and turn ON the machine. Partial Reset * ...
Question about WorkCentre M-24 Color Copier
...machine. The power switch is located on the front right side of the machine under the Control Panel. NOTE: Before the machine is powered ON again make sure the Touch Screen is blank. Power ON the ...
machine has no power, it is plugged in and the fuse has been changed, there is power to the socket, IF there is no power going to the machine.possible fuse not properly mounted.Try to check using a ...
...... No response from the machine. It appears as if there in NO power or indication of power to the machine. Power source is providing power properly. Please advise....... Greg IS THIS A ...
...machine 2.) Power up the machine. When the Xerox C2424 power on self test v4.2 displays I press the Up arrow button then press the Enter button 3.) Nothing happens 4.) Power down the machine, wait 10 ...
Question about WorkCenter C2424DN All-In-One Laser Printer
...power up. I took machine to a former sewing machine owner who still fixes machines and power switch was apparently replaced. The button will go in and out of case alright now but first time on there ...
...machine's power cord is connected securely to the power outlet. If you are using a surge protector, extension cord, or power switch, disconnect it and plug the Brother machine directly into the wall ...
...machine power cord from the power device. 6. Plug the Brother machine power cord directly into a wall outlet or a different surge protector strip. You may need to use the reset button on the power ...
Question about printerall-in-onelaser mfc8710dw
...power cord at machine end. If still no power, try cycling the sewing machine ON/OFF switch a few times. If still no power then likely the internal fuse or other. ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions