Questions & Answers for: presser foot

...PRESSER FOOT G TO MY MACHINE?? there are 2 type of presser bar foot clamps one allows you to snap on the foot--raise & then lower the presser foot holder until the cut out is directly above the ...

...presser foot for a Janome 1017 here's some links,, check to see if any of these are the one you ...

...presser foot be raised slightly on pfaff tiptronic 2030 to facilitate free motion quilting? There is not enough clearance with feed dogs down to freely move material to quilt. Thank you. You need a ...

...presser foot for ja nome schoolmate Please add a comment with the specific model of Janome Schoolmate sewing machine. Fpr the Janome Schoolmate S-3015, make sure that the needle is fully up and raise ...

presser foot? If it is presser foot, most likely you do not have the correct presser foot for your machine. Search the internet for the "make model presser foot" (substitute make & model with your

...presser foot bar and on the presser foot. Perhaps something has become loose, fallen off, or become damaged. Have you tried a different presser foot and, if so, does it work? If more than one presser ...

...presser foot, the safety device is activated , The model is Nv 1800q innov-'is The presser foot has been tightened ,machine has been retreaded ,meddle changed numerous times , it keeps stopping ...

...presser foot is disconnected. How do I fix it? If the presser foot isn't connected to the presser foot shank, place the foot under the center of the shank. Lower the presser foot lifter making sure ...

...presser foot designs you are dealing with. For all presser feet, lift the presser bar to the highest level before removing the foot. For the snap-on foot, push up on the toe (the front of the presser ...

...presser foot LEVER on Elna 9000 Computer model? The 9000 Computer model is no longer serviced by machine shops in my area, because there are so many plastic parts in the inner workings, nobody is ...