Questions & Answers for: print faded zebra printer

Printing fade at the midle of the page Hi there, I was making some testes printing labels with my Zebra S600 and everything was going just fine. But, when I finaly got the label printing out just the ...

Won't print Tried turning off to reset, but light comes on and stays orange. Can't get it to print anything! HELP! it could be a lid open sensor issue, if you put pressure on the lid does the light ...

Zebra LP2844 thermal printer the print on my labels has begun to fade how can i improve this open the unit and on the front top you will see a thermal print head, (looks like a shiney bar) using an ...

...faded on the right half when it prints My boss just got us a used Zebra TLP 2844-Z printer. After (finally) hooking it up to my computer and getting it to print at all, I'm finding that the right ...

...print is starting to appear faded. Now on a normal Printer you'd just change the ink cartridge or toner. I'm not too knowledgeable on thermal printers and was wondering what I had to do? Thanks Emma ...

...faded and hard to read, any ideas?? Many factors affect print quality: Heat settings, speed setting and label face stock quality and type are a great place to start. How old is your printer? How many ...

The printing is fading, more so on left of label, but also on right side of label Try cleaning the thermal print head. If that doesn't do the trick, the printhead may be defective.

ticket, and what it does print is very faded. If the problem is on the right side , try adjusting the head pressure adjustment knob on the top right side. You can adjust with a flat blade screw driver

...2824 has been installed on another computer with the same operating system ie Win 98. Now when I print a label it prints the first line fine then the subsequent lines fade to becoming unreadable

...print light or faded. You can trouble shoot with a roll known to be fresh. You can get one free here to test Labeldomain com . If this does not solve your problem then please check this article on 5 ...