Questions & Answers for: probe is stuck

...stuck in the "Temperature Probe" mode. It's asking us to enter the probe temperature, eventhough we don't want to use it. We tried unplugging the stove hoping it would reset it, but no luck. Does ...

Ford 4cyl Probe cooling fan won't shut off even with car shut off and key removed Only way to shut off is to pull the fuse. the cooling fan relay is probably stuck on. it's also located under the hood

...stuck I could not get the oven probe to work. It kept saying insert probe even after it was done. Then I could not change the pad, which is stuck on oven temperatures. It will not cancel. Thanks you ...

...stuck in probe mode and will not cancel.. what should i do Measure the resistance of the meat probe on the K-ohm setting. If it's open, then the probe is bad. I'm not finding a spec on the resistance ...

will not move (96 ford probe) seems to be stuck in park.. check your brake switch sometime youhave to step on the brake to take it out of park

...stuck in 2nd too.But I have a Probe 1989 GT and shifter will not move. I am told I need to tap/hit some rods in the tranny, after I remove about 10 bolts on the side of the tranny, and this would ...

...stuck on a 1995 ford probe as when engine is started it races with no control when the engine is staarted the engine revs up with no control This sounds like a major vaccum leak or a stuck IAC(idle ...

...is not stuck open. Manitowocs have a l.e.d. that lights up if the water probe senses water. If that is lit then your inlet valve is stuck open. Replacing Manitowoc water level probe and Ice ...

On a 96 ford probe can torque converter be by passed Had a code for stuck converter no, it does the same thing as the clutch does in a car with a manual transmission.torque converter

Meat probe is stuck at 310 Removing and reinserting probe. ice water bath