Question about DJM-600 Silver Professional DJ Mixer with Auto Beat Cou Home Equalizer
...put the master to cue to hear something from the master? You should be ableto hear the master at all times then choose wha channel you are cuing up. Sounds like a pot. problem on the switch or
Question about DJM-600 Silver Professional DJ Mixer with Auto Beat Cou Home Equalizer
...problems running multiple IDE devices Ok, you have 2 x UDMA ATA 133/100/66 Bus Master IDE ports on that motherboard, so you can support 4 ide devices. It is important that you split your devices ...
Question about DJM-600 Silver Professional DJ Mixer with Auto Beat Cou Home Equalizer
master channel problem hello, the master channel when moved off 0 peaks red on left db. i have tried different connections and last of all disconnected everything and still i have the same problem. is
slave on one IDE channel, with the other 2 CD drives on the other IDE channel, one set to master and one set to slave. So, pull the CD drives out and check the master/slave jumpers on the back of them
star box codes keep losing channels.no sky sports or movies channels i had the same problem delete all channels on master reset and scan again turn on key emu and all channels should be back on :D
Question about Speedlite 580EX II TTL Flash
...master and the second the slave. They are both on the same channel. They are both on the ETTL mode. When I try to take a photo (Canon 50D) the slave unit will not fire. Make sure the slave is far ...
...master remote,I donot find option for PROGRAMME CHANNEL.SOME OF THE CHANELS SKIP,I want all channels to be programmed..pls give the solution I hv PANASONIC COMMERCIAL TV - MODEL CT 2522 HE. I am ...
...master and 1 slave) when placing 2 drives on the same channel for example. Most likely your jumper settings are not correct and are causing this problem. The jumpers are located on the rear of the ...
...Master since it will have it's own Channel. Second, try remove all but the New HDD from the system. Set the New HDD up as the only HDD and see if the BIOS will see and allow you to select it. If it ...
Question about VAIO VGC-RA840G PC Desktop
...channel (IDE 0) and the DVD to the Secondary master (IDE1) on the motherboard. This way, if you need to ever re-install the OS you will not have any problems. The only way , apart from a corrupted ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions