Questions & Answers for: project 1 stopped working

Picture and sounds turns off and on by itself about every other minute our tv and sounds turns off, then comes back on..does change the channel but is very annoying..Is there a fix for this? We tried ...

mitsubishi wd 52725 will turn on . did the reset .new lamp.no pow no power.no fan green stops blinking np power.i replaced the lamp 1 month ago tv worked fine .tv will not power up. normally if you ...

My Zenith TV stopped working when plugged in the little red light comes on but nothing else happens. DESOLDER CONVERGENCE IC'S TURN SET ON IF IT COMES ON W/BAD PICT 1 OR BOTH IC'S WERE SHORTED

...1 and Fan#2 message on screen.It won't allow me to get on to service mode.Both fans are working, replaced actuator board, nothing. I noticed power board is sending 205V DC, and actuator board CN103 ...

works for 15mins then starts making whirring niose and stops and starts Bad Color Wheel Call Encompass for Part 1-800-638-3328 Do Not Play TV untill this is Fixed it can cause Damage to Light Engine ...

sony KDF-50E2000 powers down and power light blinks 4 times Fan 1, 2, or 3 has stopped working. You can get the replacement fan at www.tvrepairworld.com

...1 second then immediately stop working. The power-on button on the set is flasing red intermittently which seem like a self-diagnostic. Would you know the source of the problem? May be a short. ...

...stopped working. I replaced the fan it works now but still shows 4 red lights. any suggestions? I read somewhere that there are 4 fans on this tv. I have only located 2. how do i get to the others? i ...

working on my samsung 42 in tv does any one knows what to do before call out!!!!!! Convergence ICs need to be replaced. Go to Encompass Parts Distribution 1-800-638-3328 Type in your Model # for Parts

i have a wd 52825 and accidentally hit the system reset button with a stiff brush...now the green light won't stop blinking and won't power up...what are my options? I found this on the web .... might