Questions & Answers for: Isuzu Rodeo how much psi should be in ac

...Rodeo, built for Australia. I recently fitted a electric oil pressure gauge. At idle hot it has 55 PSI and 2000 RPM hot it is nearly 90 PSI. When cold it is obviously much higher. Could cam shaft ...

...ac blows outside air temp, i tried to recharge. when i connected unit the gauge read 70 psi. i let out psi to 50. put the charge in and it took 90% of can and read 55 psi. it still blows outside temp ...

to line up with the crank. You can do a compression test, compression should be at least around 128 psi with no more then 20 psi difference between cylinders

...PSI Normal low side reading with AC on high speed and MAX & engine at 800-1000 RPM?s - Ranges from 25-35 PSI - Note that on many Chrysler products a normal reading on the low side may be ...

non ac belt on engine with ac ac compressor bad on 98 s10 4.3 /// like to use belt for non ac engine can this be done yes. I would also remove the ac compressor all together, but it will be fine with ...

...guage seems to read low when idle and raises when rev engine. standard according to manual is @ 8 PSI I too thought that it was low. but when you drivce the presure rasies to @ 45- 50 PSI so it is ...

... its inside the tank, you need to check the fuel pressure with an inline guage, it needs to have 30 psi, mine was only 15 psi. also you should have the injectors cleaned. good luck. ...

FUEL PUMP FAILING OR YOU HAVE FAULTY TRANSMISSION TORQUE CONVERTER.CHECK FUEL PRESSURE SHOULD BE 43 PSI OR 9 - 13 PSI. IF FUEL PRESSURE OKAY PROBLEM IN TRANSMISSION.TORQUE CONVERTER NOT LOCKING UP FOR

ac is there a idler pully on ac belt to crank or not bought truck with no ac belt bought one cant ajust ac compressor to make belt fit Yes, there is an adjuster pulley. See pics below. 4-cyl engine: 6

...almost betting to be a busted piston do a compression test to see your pistons should be around 190 psi if number one is down a long way ie in my case 50 psi its about $250 to fix your self and you ...