Questions & Answers for: pump sounds pumping gravel

...sounds like gravel is in washing machine the grinding noise is only in the rinse cycle. Can we take some thing out that would let us see if there are coins stuck somewhere? I have had this same ...

...has been done to it by the normal jack of all trades,, sounds like the seal has been damaged on the water pump,, or just have been used a lot and created dirt and gravel to nacker up the pump

Sounds like there is an obstruction striking or rubbing against the impeller in the drain pump assy. It will require removing the front cover/ Drive belt from the bottom of unit/ Hoses from drain pump

sounds like the discharge pump is going bad. It is making a gravel sound when it is pumping the water out. take the plug/power lead for the machine OUT so machine no power then. safety first. you need

pump makes sounds like it has gravel in it. I have inspected the internal filter and it is clear. Problem seems to be in the pump. Pump does not completely drain the system. Repairman thought it might

...sounds like gravel rattling around during the spin cycle while the machine is draining this is caused by small articles caught on the influent side of the drain pump. You can remove the hose from the ...

...Sounds like you have checked the Sump Cap for any clogs and drain hose to drain pump for a clog. If your machine is not a FAV6800A or FAV9800A then please disregard my solution please don't vote on ...

...pump mode we hear sounds like gravel or rocks inside the big copper line - heat works but what causes the sounds/ You are reversing the flow of refrigerant in the heating cycle. Since liquid is now ...

...pump sounds like it is churning gravel. My pool is almost new. What should I do? If its almost new, then take it back to the store and exchange it. If its not under warranty, then remove the wet end ...

...pump and I called the manufacturer due to a high pitched squealing sound. They recommended I change the shaft seal. I changed it and the noise continues. It does not sound like the bearings (no ...