...RAP relay. If it has gone bad, it is possible it is stuck supplying power and needs replacing. The relay should be labeled in the fuse panel, and there should be other relays in the panel with the ...
Relay, the RAP relay also supplies power to the radio. The RAP relay is also fuse protected by the RAP fuse in the under hood fuse block. The RAP relay is energized by the BCM body control module. The
...rap relay before the circuit breaker http://www.fixya.com/cars/t5273497-sunroof_will_not_work http://www.fixya.com/cars/t1625400-power_windows RAP 2 Fuse #7 50A ...
...RAP Relay that means the BCM can never ever close that relay./ this kills the RAP RADIO feature (read the operators guide yet, it explains this) the Radio schematic shows there are 2 power pins RAP ...
Question about 2006 Impala
...RAP relay. Components and systems that are active in RAP are also activated anytime the ignition is any position other than OFF regardless of the door switch signals. Relay Controlled RAP The BCM ...
Question about 2006 Impala
...RAP relay. This provides power during the RAP period for the components supplied by the RAP relay. The RIM module opens the RAP relay to end the RAP function when it ends the RAP function as outlined ...
...relay's . RAP #1 & RAP #2 . The RAP #1 relay supply's power to the radio an driver side power windows . I think maybe you have two different problems . The radio not turning off, maybe caused by ...
Question about 2006 Impala
...RAP relay. The RAP relay allows the BCM to control the application of power to circuit 75. Circuit 75 provides power to the following circuits: • Circuit 43 -- Radio • Circuit 143 -- Power windows, ...
Question about 2006 Impala
...RAP relay contacts stuck closed . supplying battery voltage all the time . RAP relay - Retained Accessory Power Relay Controlled RAP The BCM keeps the RAP relay energized during all power modes, ...
Question about 2000 LeSabre
RAP relay ON and OFF. Does the RAP relay turn ON and OFF with each command? -- YES - Go to Step 8 NO - Go to Step 5 5 Connect a test lamp between the control circuit of the RAP relay and the coil side
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions