Questions & Answers for: rear end honda crv

Question about 2006 Element

2 Answers

...Just get it serviced and it should be ok. Change the oil in the rear end it breaks down and causes a slipping noise. It takes 1 liter but the sell it by the quart so you have to buy two

Ad

...rear end fluid. Hi, I had the same problem before, you also feel a little shake on the steering wheel. you have to check on two things: First: check your car's hydrulic steering oil level. Second: If ...

Ad

...crv noise when turning steering wheel right or left it sounds like rear differential noise does the rear end feel binding? if so you req the diff to be flushed twice there is a set procedure for ...

...rear sway bar if it does then replace the end links and bushings they are usually the culprits of clunking noises and also check the rear shocks(or struts) for leaking or binding put your knee on the ...

Question about 2003 CR-V

1 Answer

my 2003 are good honda crv has a loud howeling in the rear end.Brakes are good including emerg brake. Sound like the back axle, maybe diff? Change the rear diff oil and noise will cease. ( known issue

...rear end noise IF YOU HEAR A CLUNK CLICKING OR KNOCK NOISE YOU HAVE LOOSE DRIVESHAFT BOLTS OR WORN UNIVERSAL JOINT BEARINGS. WORN REAR AXLE BEARINGS WORNED OR DAMAGED. Could be the rear differential ...

Question about 2003 CR-V

1 Answer

...rear end differential and presto..All Wheel Drive. You do nothing, no switches, no levers, the computer does it all for you. If it is indeed AWD, you can look under the car to see if you have a ...

...crv rear end clunk sound a few months ago when I go over a bump there started a distinct clunking sound from the rear suspension. mine was making a clonking noise turned out to be a broken coil ...

end and new drive shaft, new axle, new diff in rear and still waddle Are your front tyres, the same make, have the same wear and correctly inflated? Over inflation can cause this. Front wheel tracking

...rear end suspension points for loose spot welds, cracked body floor panels, loose towbar bolts etc to get any noise there has to be something moving, stretching or cracking so a very close inspection ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...