Questions & Answers for: kawasaki rear seat

...seat to the rear fender. These are removed with a metric hex wrench (Allen wrench). Don't mess with these unless you can fit the bolt socket exactly. There should be a hex wrench in your Vulcan ...

...rear of seat. Remove right side plastic cover over battery (open with key, pull off cover) .Remove plastic cover on left side (2 large phillips head screws.) Remove 2 stainless hex heads on each side ...

...rear of the seat & the ducktail whilst turning the key & gently lift up this should enable you to remove the seat you may also want check that it is not secured to the frame buy a small bolt ...

...rear seat. after you remove the bolts from the rail ( # 130) you can side the seat up and back it will "pop" off. then your bolts from the rear of the rider seat left and back. now both seat are off. ...

rear seat support [backrest] Can you still buy a rear seat support [backrest] and saddle bags for a [double seat] for a 1999 1500 Kawasaki Drifter and where? I am in Brisbane, QLD, Australia. yes goto

...a cable with a ring on it, look in the center under the mount to the front. Pull the ring and the seat should pop up at the rear and pull the seat back to slide it out of a tab there under the

rear seat the lock is on the lefthand side, rear,underside, once removed you may find a 10mm bolt at the rear of the front seat, underneath the rear seat, undo this and remove the metal securing plate

...REAR FOOTREST UNDERNEATH FOR THE REAR SEAT, AND THE FRONT SEAT IS HELD IN PLACE BY 2 ALUN BOLTS TURN UP THE REAR CORNERS ON THE SEAT, TO FIND THEM, SOME HAVE A BRACKET LOCATED UNDER THE PASSENGER ...

...rear seat and turn anti clockwise, the rear seat lifts from there and when removed the front seat will lift up. Hope that helps. put your ignition key in the rear lock, just underneath the pillion ...

...rear seat ,but the key is barrel hidden and can only be seen by looking underneath and the key is inserted with the main plastic (black handle)bit facing toward the ground and the metal part of the ...