...rear of the seat to the frame. Remove those two bolts, and then slide your seat rearward, because there is a plastic tab that holds the seat to the gas tank. Installation is reverse. Slide fwd, ...
describe how to reamove rear seat on 2001 v star 1100 Should be a bolt behind the rear seat going into the fender and maybe between the 2 seats.
...Rear seat, there is a single acorn nut (metric 10mm) on the back fender. Remove that and the seat will come off if you pull it up and back. Front seat, there are two allen bolts which were under the ...
...rear seat of a Yamaha Virago 250? the nuts for the bolts located below the rear fender do not fit in a torque wrench... The rear seat is held in place with a single bolt near the rear of the seat. ...
...the main seat on a 07 R1 AT THE REAR CORNERS OF THE SEAT PULL THEM TOWARDS THE FRONT AND EXPOSE THE BOLT BELOW HEX HEAD I BELIEVE REMOVE BOTH SIDES LIFT SEAT AT REAR PULL TO THE REAR AND ITS ...
...rear seat ti install saddle bags How do I remove and reinstall my rear seat too install saddlebags. Normally one bolt in the back and the pillion slides into the driver seat. Pulling back on the ...
How do you remove a seat from a 1996 Virago 1100? remove rear seat with key to expose the bolt for the front seat. Remove bolt & lift front seat up & back from the rear!! Ride Safe Bike-Doc
...rear seat , remove the screw at the back of the seat and lift the back and pull the seat toward the rear of the bike to unhook the front. On the Classic this should reveal a bolt at the back of the ...
...rear seat lock the rear rear seat latch will not latch I think it is the spring how do i ensure the spring is correct Hi, Anonymous for this situation I would call my local dealer or reputable shop's ...
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
316 Questions
292 Questions