Questions & Answers for: receiver without dish

...receiver that needs to be unlocked. Is there anyone who is able offer some assistance in order to get it unlocked? thanks in advance the only way to unlock it without the code is to contact dish ...

...dish. i want to use them as dtv tuners for local channels only. without sat subscription it wont let me tune local dtv channels from the seperate antenna in. The antenna ports on these receivers are ...

...HD receiver without DVR. This receiver and remote may be exactly what you are desiring. I hope this answered your question. Thanks for using Fix Ya and let me know if I can be of further

...without unplugging the tv for about 30 seconds with the component connected and powering the tv back on. The issue I believe Dish was trying to convey was to make sure the port you plug the receiver ...

...without reciever.i do have reciever to main tv but could also view on bedroom tv If you have a 311 receiver or any single/solo receiver than you will need to put the new set on channel 3. If you a ...

...without unplug) don't solve the problem. thanks, Make sure that the software is correct. Should be P4.07 you can go into the DVR and replace the hard drive but I would suggest getting Dish Home Plan, ...

receiver go off you can disable theInactivity Standby, you will want to push the buttons of MENU-8-8 and make sureit is disabled and you will be able to watch a program without the receiverturning off

...Without knowing the full issue I will send a link that will help get TV1 wherethe receiver is back to programming, if you have any questions or need morehelp please e-mail me at ...

...receiver will function, but will not have access to paid channels without authorization from DISH (which you can get by calling 1-800-333-3474). You may have to run a check switch test after ...

...That voltage will damage the dish without that multi switch installed. an ordinary splitter will get the picture from one receiver to two or more tv's as long as the cable length is not too