Questions & Answers for: relay check

relay. Check power availability at the supply side of the relay contacts - should have 12v from a supply fuse on one side of the normally open contact (note -this supply may only be available when Ign

Ad

...Relay? Check to see if that is getting power. Then check to see if the ASD Relay itself is good. You do not have to use any special tools/knowledge to check this. You can change this Relay out with ...

Ad

...relay. Did you check both? Also, did you check the resistor on the drivers fender back near the master cyl? Both relays are powered by the asd relay that is energized by the crank position sensor via ...

...Check the horn relay to see if it works. Most cars use the same relays for multiple other functions. Check the part number on the horn relay and find another relay that is working that has the same ...

...relay out, and check for a signal to relay terminal when the car is cranked. Then you would have two terminals showing power, the pump feed terminal, and now the signal from computer. If no signal, ...

...relay Check the power feed for the pump at the fuel pump relay. Pull the relay out, and with a test light clipped to a ground, probe all the terminals that the relay plugs in to. One terminal should ...

Question about 1995 Grand Cherokee

1 Answer

is sending power to the relay, and check the green/black wire from relay to coil. If no relay action, possibly a bad relay, or the PCM is not turning the relay on. Good luck. Let me know what you find

Question about 1995 Grand Cherokee

1 Answer

...check the elcetrical circuit ? Do you know how a relay work's ? The BCM - body control module controls the trunk release relay . Check for B+ voltage at the relay . VEHICLE RELAYS Operation ...

...check the relay have some one at the relay listening to see if it clicks when you turn the key. no click no volts no volts may be a warn out relay, if it buzzes change it. Go back to the fuel pump ...

...relay and check fuse power under hood for 12 volt reference. Check to see if relay engages when blower is turned on, if not pull relay and see if second art of junction has proper ground and power. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...