Questions & Answers for: remove agitator maytag atlantis washer

Question about Maytag Washing Machines

1 Answer

...remove the agitator by, first, pulling the agitator cap and softener dispenser off. Locate the bolt on the center post and and loosen. The agitator will pull straight up to remove. If this is a ...

Ad

Question about Atlantis MAV6260AWW Top Load Washer

1 Answer

scarf stuck around agitator. scarf is wraped around agitator , would like to remove agitator to remove scarf, Thanks Sam remove cap and ,,remove 1/2 inch agitator screw and pull straight up

Ad

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...remove agitator Black oil like residue discharged from washer during use. Stain clothes, almost impossible to remove. Loosened nut on agitator but it will not budge, and am afraid of damage if I try ...

Question about Atlantis MAV7551 Top Load Washer

1 Answer

...that the socks have gone under the agitator but unlikely that they have disappeared alltogether. You can remove the agitator to see if they are there. Tha'ts the best I can tell ya Good ...

Question about Atlantis MAV7551 Top Load Washer

2 Answers

...remove the agitator: 1. Remove the center post cap and softener dispenser by pulling it off. 2. Locate the agitator bolt under the center post cap and loosen. 3. With the agitator bolt removed, lift ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...under the agitator. How do I remove the agitator to get it out? pull the top cap off down insde the agitator is a bolt. it is a 1/2 inch or 7/16 inch in size. remove the bolt and lift up

Question about Atlantis MAV6000 Top Load Washer

1 Answer

up just an inch or so? remove center downy cap on top of agitator get a 7/16 socket and long extension and hold base of agitator and loosen screw in center of agitator pull up agitator out of washer..

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...keeps leaking out after wash is done i believe all you have to do is put your fingers underneath the bottom of the agitator and pull up and the whole agitator pops up to remove it out of the

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...remove the agitator in my 6000 maytag washer to clean under it? Maytag usually have a screw afixed to the agitator from the inside 1/4 in socket between the groves about 40-50mm from the base of the ...

...are on Page 8 of the guide. Note: Unless you are mechanically inclined, do not remove the agitator. You may not install it again properly and then will have to pay for a service call. Best

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...