...BASE: Remove bar from base and place shell onto base so it lines up securely. Starting with the rounded end, push bar compeltely through slot until it locks in place. TO REPLACE SHIELD: Lay shield ...
Question about Alpha Omega Elite 5-Point 22-155
...remove the base and details of converting to booster. Thanks! I called Cosco at 1-800-544-1108 with my model number and manufacture date and they were happy to email the instructions to me in PDF ...
Remove the base by pushing the metal rod on the bottom through the side that is open. This will allow you to remove the straps that hold the covering in place. My base and seat do not come apart. Here
...need to bend the plastic tab to the side in order to slide the rod out of the base. Once the rod is removed the base comes free. After removing the 5 point harness straps (and cleaning all the crumbs ...
...remove the base. thanks scott and jen Have you removed the harness? Once the harness is removed, you pull the top of the back seat down and back at the same time, and the back should be removed. Can ...
...car seats, especially if you have bucket seats. The bottom-most portion of the carseat base can be removed to make it more stable. I have not tried to do this, as mine is fine with the wider base, ...
Question about Summit 22260 - Houndstooth
...base and replace rod. Hope this was helpful. one of the chest clasp is missing. how can i get another one As of 14 Nov 2012, this URL has the full instruction manual, which shows how to remove and ...
...remove the base or do i just remove the harness belts The base is what makes it a booster seat. Some seats the back is removed but if yours is the one in the picture, it looks like you have a belt ...
Question about High Back Booster 22-200 /22-207
...and found the easiest way to reassemble it was to remove the base during install of the straps and then replace the base. i took the seat cover off costco serenty car seat.How do i put back
Question about Alpha Omega Elite 5-Point 22-155
How do I convert the car seat into a booster seat? Turn the car seat over and remove the pin that holds the base in place. Then remove the belts and the buckle. voila, a booster seat.
Usually answered in minutes!
82 Questions
45 Questions
28 Questions
25 Questions
