Question about Universal Remote Control
...circuit board and the rubber pad is damaged with heavy use. So use CARBON INK to recreate the contacts in the circuit board. Also use carbon dots(Available in sticker form) in rubber pad. I think, ...
circuit board 1547266C I'm looking for the part and can't locate it. The tv is a RCA F32650YX01. Where could I get it today (sunday) Located in Metro Dallas / Ft. Worth area. thanks remove the board ...
...surfs by itself, how can i fix it?? Pry the black cover off the top where the buttons are (make sure tv is unplugged), then take circuit board out (remove ribbon cable first) and get it
circuit board to slide out of the black plastic holder?? Before I go ruining some small parts in the process I thought I'd ask an expert or two how to go about sliding the board out to expose the pins
circuit board. Can I remove and just use remote? if yes, where is it located and what does it look like. I am in Georgia when the menu keeps poping up it ussally the front panel cuircit board. This is
Question about D52W19 52" Rear Projection Television
...ITC222 deflection boards from www.tvrepairworld.com . They also include the instructions on how to remove and replace the circuit board. They are listed under the RCA circuit board
Question about HD52W59 HDTV Projection Television
...a replacement ITC222A deflection board from www.tvrepairworld.com its listed under the RCA circuit boards, and they send a CD that shows how to remove the deflection board and install the new
circuit board ,,but it makes a buzzing noise like its not grounding on the board.nothing is burnt up on the board and thr rca inputs have been removed to troubleshoot.when i hook up wires to the board
...circuit board, its in front of the light and mounted to the front of the tv. To get to it you remove the back cover with the tv cooled down and unplugged of coarse. Be extremely careful when removing ...
Question about HD61LPW42 61" Rear Projection HDTV
...circuit board remove from that back plate, where the RCA jack pokes through?It would be nice to get it out of the way.The RCA jack does unsolder from the bottom of the circuit board.Suggest;1) Use a ...
Usually answered in minutes!
Step 2: Please assign your manual to a product: