Questions & Answers for: Pontiac remove cover

Question about 2001 Grand Am SE

1 Answer

...remove the cover to expose the plugs and the short/stubby plug wires. Yes those boots are plug wires. Now remove the boots if they didn't stay on the cover when you removed it. Just snap the boots ...

Ad

Question about 1998 Grand Prix

1 Answer

...remove the plastic cover, look for some screws from the bottom part of that plastic cover. there are about 4 screws. you ,may need a long philips screw driver. after you remove the screw, the top ...

Ad

cover (also heat stakes). Remove the heater core. Installation is reverse of removal. You'll need to drill the marked dimples next to each of the now broken heat stakes. Drill 5.5mm holes in cover

Question about 1998 Grand Am

4 Answers

cover bolts, remove the 10 mm bolts from the timing cover, if you look between the 2 cam gears you will see 3 bolts each side, remove them and the valve covers are off. Your full of ****??????????????

Question about 1997 Grand Am

1 Answer

...remove the cooling tube. When cutting the blower motor cover, make the cut just the thickness of the cover, which is1/ 8 inch (2mm) thick. Cutting deeper than that may damage the cooling tube. For ...

Question about 1997 Grand Am

2 Answers

...remove the cooling tube. When cutting the blower motor cover, make the cut just the thickness of the cover, which is1/ 8 inch (2mm) thick. Cutting deeper than that may damage the cooling tube. For ...

Question about 1999 Sunfire

1 Answer

cover.Remove the lower steering column cover screws and lower the steering column cover.Remove the 2 switch mounting screws and remove the switch.Detach all wire connectors from the combination switch

Question about 1994 Grand Am

1 Answer

...remove cover remove oil pump gears.when installing another new oil pump lubricate the oil pump gears with clean engine oil pack the pump cavity with petroleum jelly.torque oil pan cover screws to 97 ...

Question about 2007 G6

1 Answer

cover remove engine cover Pry apart the back cover by guiding the flat-head screwdriver along the separating line between the front and back covers of the iPhone. When the back cover is apart from the

...cover gasket (54). Remove the case side cover inner gasket (59). Inspect the case side cover (53) for the following conditions: ?€¢ Damaged or porous gasket sealing surfaces ?€¢ Damaged or porous ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...