Questions & Answers for: Acer AL remove cover

remove the current base? Where the footpiece joins up with the screen, you'll find a round cover from left to right which just clips in. carefully squeeze the ends and pull away untill released. under

Ad

Question about AL1917W LCD Monitor

3 Answers

...remove this cover? Will I need some sort of specific tool to do that? Please, I need your help. Thanks in advance. Ismael. Mexico city. Are you sure that the monitor is the problem? Did you check the ...

Ad

Question about AL1917W LCD Monitor

1 Answer

...Remove the cover that covers the stand holder joints. you can remove it using a flat head screw driver, it is removeable only it appeares stuck to the back cover. After you unscrew, use flat head ...

Question about AL1912 19" LCD Monitor

1 Answer

...cover to be slipped off. Remove two screws and slide off the EMI cover. You should now see the power board - the one the power cable plugs into. Check the capacitors - its likely you will see one or ...

Question about AL1717 17" LCD Monitor

1 Answer

...cover 1st remove the base cover by by squeezing to release the clips and remove the 6 base mounting screws. 2nd remove the 5 screws in the back cover. 3rd push and pry at the parting line to release ...

Question about AL1916W 19" LCD Monitor

1 Answer

cover you must Remove the basse stand and the five screws holding it down. Now run your fingernail along between front and back covers. There are five catches on the top, four on the sides, and six on

Question about AL1917W LCD Monitor

1 Answer

...Ok, theres clips locking down the back cover at the side of the LCD. What you can do is by using a flat head screw driver push into the side of the LCD and bend to remove the cover and the

Question about AL1916W 19" LCD Monitor

2 Answers

...remove the back cover from the monitor .using a flat screw driver or another slim tool begin from one side .stick the screw driver into join line between the front and back cover and twist it ...

Question about AL1511 15" LCD Monitor

1 Answer

remove the back of my Acer 1511s. There are two screws at the bottom which are easily accessible but can't see any others. The front cover is anchored firmly at the top corners and at the bottom where

remove the monitor's back cover and, front cover; when you can see the circuit board check for a buldged can capacitor or, two; replace these by unslodering them and, resoldering the new ones in place

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...