Questions & Answers for: Garmin eTrex remove crazy glue

Cracked glass The outer glass of my Garmin 76Cx is cracked. It still owrks fine, but difficult to view. Does anyone know where I can get a replacement glass or a reasonable substitute? If you're handy

glue is no longer holding. How do i fix it? remove the rubber cover go to any hardware store and ask them for two way tape pref the thin one Remove the original tape from around the case. There is two

crazy, but that can be solved by removing batteries for a reset, or hitting it gently over the Earth-like logo with two fingers. And yes, that joystick-like little thing tends not to react to movement

unit locks out fine blue line appears have to remove batt and then turns on the unit turns off and ablue fine line appears and locks unit fromm doing anything so i must remove batteries and then turn ...

New Garmin Legend get following warning You are about to erase map data that was pre-programmed by Garmin. If your GPS uses removable Data Cards, we recommend that you do not continue as the ...

My eTrex Legend cx beeps constantly when turning off. The only solution I have found is to remove a battery. Any ideas? I have the same problem. The unit is only 1 week old and I have used it maybe 5 ...

can i install my topo canada map on my etrex legend or do i have to remove basemap first and then load topo No you can just load the topo and have the etrex directed to the card that you have ...

etrex enter button does not work It may be the tactile switch that is broken.  I had the same problem on my older model etrex.  I carefully removed the surrounding rubber case wrap and the ...

...original glass from its seat. Working from the outside only. Not opening at all the GPS unit. Then removed the remainders of the adhesive tape. The cell phone shop around the corner had plenty ...

...Turn on my Garming the keys don't work, they don't respond to my action, I have to remove him the batteries to it turn off. Go to garmin website , is it still under