Questions & Answers for: remove link Watches

...remove to remove a link. Or they have a pin in each link that you must push out to remove a link. Some have a "hairpin" looking keeper that you remove. Hope one of these will work for you. Good ...

...link. Remove it in the same way. Now replace the end half-link and re-attach the clasp. Removing a link from the other side is a little more difficult. The clasp lock is held on with a long pin (slot ...

...Link Remover tool, available on ebay. You can remove the links without the tool but the time and work, just isn"t worthit, even with the tool if you don"t know anything about watches, your best bet ...

...quot;New York" watch band With the watch on your wrist, check to see how many links need to be removed from your watch. Your watch should fit comfortably on your wrist. Remove the extra links ...

...links are held together with pins, for this you"d need a link remover tool, Best Bet is to have a small watch repair shop remove these links, hold onto the removed links in case you need them

...remove one link, remove it from the six o'clock side of the band. If more than one, then try to balance, one from each side, etc. The easiest way to remove individual links is with a "link remover" ...

...remove a link from a Bewell Watch, ZS-W1042. It has a pin type as seen from one end and a tiny screw slot as seen from the other end. I have attempted to unscrew the pin from the side with the ...

...remove the link bar from the band. The link band will still be attached to the clasp. Remove the link with the pliers. Repeat Steps 1 through 4 for each additional link you want to remove. 5 Gather ...

Hi just received my watch and was wondering how to remove a couple of links to make the band smaller? Searches related to how to remove links from a watch hope this helps you.. how to remove links ...

...remove. Use the link removal tool: Use the link removal tool to push the link out of the band. Reassemble the band: Once you have removed the desired number of links, reassemble the band by pushing ...