Questions & Answers for: remove oil filler cap 96

...is pf456g.you pop your hood oil filter will be at top of engine center lower than oil filler cap. you will use a 3/8 extension and 3/8 rachet. righty tighy lefty loosy. your engine holds 5qts ...

i pulled the tank straps in my 96 t-10 blazer and the tank will not come down, why? Did you remove the filler spout?

pump could be on the way out, but first check the fuel filler cap relief valve is not blocked causing a vacuum in the tank. Next time it happens remove the cap, replace the cap if that fixes the fault

oil filter on 1991 chevy s10 blazer i had a 96 so it may be different... there was a "remote" oil filter under the plastic skid plate just behind the front bumper... it took a flat screwdriver to open

...the tranny oil in it? The filler tube is located above the front of oil pan and has a plastic cap.Pry the plastic cap off ,remove plug from the filler pipe. Refill 3.2 Qts., Full refill(dry) 5.9

...emission control system, purge control curcuit malfunction, p0449 is emission control system, vent control curcuit malfunction. p0449 is often a filler cap problem on fuel tank. try tightening ...

...on the coolant level, in morning on first start when radiator is still cold open the radiator cap and rev the engine. Notice if there are bubbles and oil drops. I am suspecting head gasket

...10 Chevy Blazer is overheating. I took the radiator cap off and don't see the water flooding through. My 2000 S-10 Chevy Blazer is overheating. I took the radiator cap off and don't see ...

...remove oil spout on 96 blazer I need to replace the oil spout to my 96 Blazer. It broke off when I tried to remove the cap to put oil in my blazer. I need to know how to remove it from another blazer ...

filler neck for a 2001olds bravada. what other vehicles can it come off from I'd stick with Blazer/Jimmy/Envoy Chevrolet S-10 & GMC Sonoma pick-ups (94-04). Inc. S-10 Blazer & GMC Jimmy (95-04