What is the correct process for plug replacement on WRX>? What is the correct process for replacing the spark plugs on the 2005 Subaru WRX Wagon? thank you idk go to auto shop they will tell you
What do I need to do, to tune up my 2002 Saab 9-3 Se 2.0 turbo? Spark plugs, spark plug wires, air filter, fuel filter, and PCV valve.
...plugs on saab 93 turbo 2.0 changing spark plugs on saab 93 to replace the spark plugs you need to remove the ignition cassette which is held in with 4 t-30 screws and the plugs are underneath
...spark plug fire or not getting fuel pressure? You can remove one plug, place back on the plug wire, turn motor over and observe for spark. The end of the spark plug should be resting on a metal ...
2002 - 2005 Early Production) Underhood Fuse Block (2005 Late Production - 2007) Saab Underhood Fuse Block (2005) Underhood Fuse Block (2005 - 2007) 5.3L Engine Except Saab Underhood Fuse Block (2003
...remove the spark plug from the cylinder well. 5 Apply a thin coat of anti-seize compound to the spark plug thread and into the wire boot to reduce the chance of sticking. 6 Insert the spark plug into ...
...- any help When you raise your hood find the distributor follow the wires. should lead you to a cover with 4 or 6 screw will need a star screw driver to remove under that cover are your spark
what is code 1312 on Saab 2002 spark plug misfire, check your plugs and wires for burn marks or fowled... code 1312 ignition coil knock detection cylinder 1 and 2
Question about 1994 900
that and now i am burning my crankshaft sensor car starts and can go about 200 feet and it dies any ideas on what is going on When it shuts off then you need to see if it has spark at the plugs or not
...2002 katana 600 Help with spark Plug placement/firing order - KatRiders.com https://katriders.com > forum > mechanics-101 > 7417-... Dec. 7, 2005 - Hello my son has bought a 94 Katana GSX600F he ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
