...remove stand how do you remove stand of this model Just taken the stand off my LG 42LC2D. The stand is made of cast aluminum and has 2 long legs that insert into the base of the TV. So to remove the ...
remove the stand? Models: 26HL37, 26HL47, 32HL17, 37HL17, 42HL17, 32HL37, 26HL67, 32HL67, 37HL67, 42HL167, 42HL67, 47HL167, 52HL167, 42LX177, 46LX177, 52LX177, 57LX177 REF:FAQLCD00078 1. Carefully lay
Question about 42LG30 42 in. LCD HDTV
...remove the stand, if you cant you will need to remove the back cover of the TV and then you will be able to remove the stand, remove the broken screw and put it all back. It is pretty easy but if you ...
remove the stand. I have it hanging on a Unti do not need the stand. 1. remove the 4 screws on the back of the TV (these are located in the deep holes above the stand) 2. after the screws are removed,
...of the pedestal stand. 4) Once you have removed all five screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV. Five ...
Question about 32HL67 32 in. LCD Television
...remove the the stand so I can mount it on the wall 1)Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of ...
...stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV. http://www.tacp.toshiba.com/tacpassets-images/models/47HL167/docs/47HL167_om_e.pdf ...
...remove the stand off the tv Hi, i have instruction on removing your base stand. Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a ...
remove the stand from my Toshiba 37HL67 so I can mount it on the wall. Can you help me. Auburn [email protected] Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat
Question about 37HL67 37 in. LCD HDTV
remove the stand, you'll need to block up the bike so it'll stay upright while the stand is removed. Now, there are two ways to remove the stand. If you want to remove it as an assembly, unhook/remove
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions