Questions & Answers for: remove stuck brew unit saeco

...remove the brew unit and it is stuck in there. I figured it was not in correctly and is now stuck. I then ran it through a cleaning cycle and now the message "cleaning cycle close door" comes up and ...

...stuck in the infusion position (left side - piston up) ... At this point it really is a pain to remove. I tried lubricating the whole brew unit, but it seems to keep on doing this. I will try to ...

...The E04 code is about lubrication of the brew group. This is directly from Saeco support in Germany. However, the problem does persist. It seems to be an issue of poor design more than anything

...remove stucked brew unit (http://www.youtube.com/watch?v=NV_TppITQZI&feature=related) becouse brew unit looked the same as in my machine. But i cant insert it back - gears are in incorrect position, ...

...stuck in the remove position. I cannot replace it in the machine. The lever that says push is stuck in the pushed position Hold brew unit in your hand like you are about to put it in the machine, you ...

...brew group Put some silicone based lubricant into the long slits inside of the part that sticks out sideways. If you rotate the spindle carefully that drives the unit you will see how it slides ...

...brew unit gets stuck and if removed in order to reset the alignment of the gearing wheel in the machine, it does not align in order to get the brew unit back in place. Problem started when descaling ...

Saeco Exprelia Evo coffee machine, where it displays a "heating up" message and then restarts without any error message, could be caused by a few different issues. Here are a few things you can check:

brew unit and funnel to remove any coffee residue or debris that may be causing the misalignment. Use a soft brush or toothbrush to clean the components thoroughly. If the problem still persists after

Saeco Exprelia Evo. How to cancel descaling process? We start descaling without milk carafe. Process stuck on step "Fill half carafe ...", because we don't have it. How to cancel this process or how ...