...transport bolts an the screw is not lining up with the hole. Whats wrong?????!! There are also 2 different kinds of orange bolts. yes there is you best to remove the 3 screws holding the top on slide ...
Question about Elite 45986 Front Load Washer
...remove the transport bolts? Must you take off the top panel? We removed the transport bolts and our washing maching is humming/squealing during the spin cylce. Are the transport bolts the only things ...
Question about Affinity ATF7000E Front Load Washer
...transport bolts and spacers to be removed from the back of the machine that holds the outer drum still.(3,4 or 5 depending on model, I am unfamiliar with this one) remove these and make sure the ...
...transport to prevent damage to the washer. These bolts are removed prior to the first use of the washer and caps are usually placed in the holes left by the bolts. When removing the bolts, remove the ...
transport bolts can you damage your washing machine if you use it before you remove the tranport bolts Yes actually the outer tub can't "bounce" around on the springs and shocks so the transport bolt ...
...are the transport bolts. Remove the top cover and look down the back so you can see the part that holds the transport bolt.. Use a set of pliers and hold the part while you screw the safety bolt
Question about WFC7500VW Washer
do bottom two bolts in rear of machine have to removed before operating? there are two bolts w/washers in bottom two holes in rear. if they are transit bolts they do is it a new machine or has it just
...remove the alternator on a VW transporter t28 tdi You will see the bolts holding the alternator in place. In most cases no more than three to remove. Before starting the replacment disconnect ...
Question about WFC7500VW Washer
...remove the transport struts from my washing machine before using? Just got a new washing machine delivered. They removed the transport bolts, but there are also transport struts that the instruction ...
Transport bolts left in on first spin cycle very briefly I left the transport bolts in our brand new LG washing machine and now i am afraid that it is damaged. It started jumping around so i turned it
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions