Questions & Answers for: remove tube

...remove the tube itself. i have removed the bolt that holds it in place as well. please help. is this the bypass tube that comes from the water pump?if so it has 2 bolts .. one on the water pump and ...

Ad

...tubeRemove the expansion (orifice) tube: Use needle-nose pliers in order to grip the orifice tube. Use a turning motion along with a push-pull motion in order to loosen the impacted ...

Ad

...tube kit? Remove the top free door hinge cover and disconnect the plug there . This removes all power to the door . Remove the grill inside the dispensor , and remove the 2 screws at the bottom , ...

...tube. Remove transmission oil cooler bracket and position transmission oil cooler aside. Remove lower A/C condenser core bolts and position A/C condenser core aside(be careful not to loosen the AC ...

Question about 2002 Impala

1 Answer

...Remove the condenser tube. -Use J 26549-E in order to remove the expansion orifice tube. IMPORTANT: DO NOT use any solvents or chemicals to clean the porous plastic inlet filter of the expansion ...

Question about 2006 Explorer

1 Answer

...tube is hard to remove...due to rust and corrosion. Spray the tube with a good penetrating oil before you start. Try to wiggle and twist the tube to brake it free....be careful, the tube is thin. If ...

Question about 2010 FLHX Street Glide

1 Answer

tube, remove the fork assembly from the fork tube holder tool, being aware that the damper valve if one is installed (All touring models, with the exception of Road King, have a damper valve type fork

Question about 2010 FLHX Street Glide

1 Answer

...tube and remove the fork assembly from the fork tube holder. THEN turn the fork upside down and drain the fork oil into the drain pan by slowly pumping the fork tube and slider at least ten times ...

Question about 2010 FLHX Street Glide

1 Answer

...remove a TV tube from its cabinet? I want to repurpose the oak cabinet. How do I remove the TV works? Unplug the TV and let it sit for 30 minutes. Remove the back of the TV. You will have to remove ...

...tube. Remove remaining bolt from support bracket clamp on RH valve cover to air cleaner outlet tube. Remove air cleaner outlet tube and engine intake air resonator. Remove two retaining nuts from ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...