Questions & Answers for: removing ve steering wheel

...ve checked the fuse and it's fine but now i don't know where to locate the horn itself to check for disconnections or to replace it etc. And it's not in the manual either. Thanks. LOOK ...

...ve been through troubleshooting the starter and alternator, it may be time to replace the ignition switch. Though this is a job best suited for a professional mechanic, if you're willing to take ...

...ve checked all fuses, relay switches and bulbs. i need directions on how to change the signal switch. HELP PLEASE!!! Hi Shannon, befor you dive in and replace the indicator switch I would suggest you ...

...ve been told I have to take the steering wheel off but I don't know where to go from there. How do I change the ignition switch out yes you have to take the steering wheel off, next you will need ...

...steering wheel removal, the type of tool and size I've removed the Airbag and all necessary screws but cannot remove the steering wheel due to a large (inverted) torx type screw in the center ...

...steering column at the joint. On most triucks I've had there was an adjustment screw and locknut to reduce the play, but I don't seem to find an adjustment on this chassis. Help. ...

steering column cover, remove the bottom piece then the top, you have to fiddle with it a bit to get it around the ignition switch, the flasher is on top (7 pin? connector) get the Mopar one, I've

...ve uploaded a youtube video on the location of the noise: http://www.youtube.com/watch?v=CkhO8ULZD4M Any thoughts will be appreciated. Cannot figure out what that part is, but it has a vacuum line ...

steering wheel too tough for an amatuer? I've disassembled the windshield wipers and tested the wiring and I'm convinced the switch (stick) is the source of my faulty wipers. Is it too

...ve gotten as far as taking the steering wheel off and thats it! no need to take of the steering wheel.. locate the old horn.. then remove it.then put the new horn. if the old horn has only1 wire its ...