Question about CrossTrainer Treadmill
...replace it with the new one. I tried manually removing the screwsd as well as with an electric screw driver and the screws do not come out for some reason. Please LUBE very well the Screww with WD-40 ...
...4 Remove the screws from the console hood and remove the hood.5 Turn the pulley until the reed switch and magnet are aligned with a 1/8-inch gap between reed switch and pulley.6 Replace the hood.7 ...
Question about XP Weight Loss 620 Treadmill
...replace use de DVOM for continuity3)Tight any connectors wires very well.4) See inside if there are some wires loose and tight.5) Adjust the reed switch, clean and tight the connector very well.see ...
Question about XP 580 Trainer Treadmill
...ball bearing and lube3) Lube the deck belt, and guide for instruction manuals.4) Test the main switch, and reset button with VOM, for open, test and replace see the diagram how to do it.God bless ...
Question about PFTL79807 - 850 W/ Gamefit Elliptical
replace batteries by new ones.2) clean the batteries contacts with special spray contacts cleaner3) retight the spring contacts batteries with a pliers for better contacts very important!4) adjust the
...wd-40 use small quantity. 4)Test the input voltage motor, if there are the motor need repair 5) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty. God bless ...
Question about Sport 1000 Folding Treadmill PFTL91205 - !
...WD-40 NOT use for deck belt. deck belt is with 100% silicone lube. 3) Test the input voltage motor, if there are the motor need repair. see my personal TIPS for troubleshooting motor. 4) Test the ...
Question about XP 580 Trainer Treadmill
...schedule, Do it every week from use.Maybe you have a WORN deck belt. 2) LUBE the rollers bearing front and end, use WD-40 3) Test the drive belt motor, for cracking or worn, and replace. God bless ...
...replace if necessary 4) Test the input voltage motor, if there are the motor need repair. 5) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty.. God bless ...
Question about 650 Crosstrainer Treadmill
...Replace fuse and see if is o.k now 4) If the problem persist you must test the tension for drive belt motor, and adjust it according. 5) Test the input voltage motor, see my personal TIPS for motor ...
Usually answered in minutes!
188 Questions
112 Questions
99 Questions
96 Questions
64 Questions