4 wheel drive will not engage, the fuse is good, and the indicator lights come on when the car is started. But when you press any of the drive selection buttons, nothing engages and the buttons stay ...
4 WD service light came on. What and why would this turn on?? chances are it is the 2wd 4wd switch needed replacment, most of the time this comes on for electrical reasons, that switch is prone to ...
...4 WD light is on. What does this mean? it meens there is a problem in the 4 wheel drive system that needs to be looked at. most of the time the problem is in the encoder on the side of the transfer ...
orange light not working and 4 wd not working Check the fuse.
...properly. Truck is a 1996 Chevy Tahoe 4 WD AC 5.7 liter V8. Thank you Eugene Clark your brake light switch is the problem, check the fuse first. Your blinker switch is out mine done the same ...
...the 4*4, I keep it in 2 WD .. Um thinking just to change the filter an replace the gasket, but that might make it worst .. Any Ideas ? you might get lucky just changing the fluid, i did on my
wd-40. then work the switch a few times, it may be sticking. the button on door!jam for the interior lights, if that will not work for you. spray all the door latches, you may have to spray them a few
4 wheel drive switch not working 4 wheel drive switch not engaging @ all no light comes on on switch Notoriously faulty design by Chevrolet...I've had the same problem, Replace the switch in the dash.
...where you may need 4 wd then you can put the tranny in 4 auto. You don't want to drive all the time in 4 auto because you keep power to a solinoid all the time and will cause it to go out
Question about 2000 Tahoe
I have a 1994 chevy s10 Tahoe 4 by 4 with only the 2 buttons 4hi 4low why don't it have 2 wheel drive button It's full time 4 wd
Usually answered in minutes!
904 Questions
942 Questions
867 Questions
830 Questions
647 Questions
