Questions & Answers for: Chrysler Pacifica replace 6 way power seat

...Replace that SAME FUSE back where you found it. That should get your seats a-working for a little while. It is going to **** out again in a few days but at least you can reliably move the seats ...

power seats wont work on my 2005 pacifca checked fuses and they are good both just stopped working at the same time what can I do There should be a Circuit Breaker located within the Wiring Harness ...

The power seats and heated seats stopped working in the front two seats only in my 2004 chrysler pacifica First check the fuse.

power seat don't work 2004 Pacifica power seat passenger and driver don't work. All they do is a little bump of the motor when first trying the switch, this includes moving front to back and reclining

...seat may be not getting power. please check weather it is getting the power by multimeter. if it is not getting it there me several causes 1.fuse blown out. 2.junction box damaged 3.activating switch ...

...Replace the right door interior handle, p/n 05170261AA, as described on Mopar Instruction Sheet K6855628 included in the handle kit. 6. Install the power seat switch. 7. Install the door tweeter ...

...power seat is not operational in any direction, check the power seat circuit breaker, located in the Integrated Power Module.Black box above battery  Obtain a DRB III(R) scan tool and check for ...

replace it with the new one. 5 Bolt the ECM in place with the socket wrench. Ensure the bolts are tight. 6 Plug in the electrical wires to the ECM. The wiring harness will lock in once it is pushed in

...seat and power rear hatch work when they want. Sometimes when I press the button to move the seat the radio station changes. Also oil was just changed and oil light keeps going on and off. Any ideas ...

...and heated seats work in a 2006 pacifica i have power to relay under seat and electric seat switch works but dont heat, Check the heater fuse, if the fuse is ok then the element need to be ...